06 · Supply and installation of any capacity. Nukus

Heating equipment
in Nukus

Heating equipment selection, supply, and installation sized to your building's heat loss and operating schedule — not generic catalogue ratings. Aurum Prodest installs electric and hydronic heaters, air curtains, and convectors for commercial and industrial spaces across Uzbekistan.

Nukus sits in one of Uzbekistan's harshest climate bands: winter nights near −25°C and summer afternoons above +45°C demand equipment with a wide operating envelope — not entry-level splits. Aurum Prodest specifies low-temperature heat pumps, frost-proof outdoor units, and heavily insulated refrigerant lines for year-round comfort in apartments, schools, and government buildings. Heating via inverter heat pump often costs less than electric radiators when sized correctly.

We calculate room heat loss through walls, roofs, glazing, and infiltration before recommending any heater. Right-sized equipment maintains comfort without energy waste, excessive cycling, or undersized performance on the coldest days.

  • Building heat loss calculation
  • Electric and hydronic heater selection
  • Air curtain sizing and installation
Government institutionsResidential buildingsRetail propertiesOffices
Heating equipment in Nukus Nukus · 06

By the numbers

12+ years on market
500+ projects delivered
50+ specialists
5yr warranty

About the service

We calculate room heat loss through walls, roofs, glazing, and infiltration before recommending any heater. Right-sized equipment maintains comfort without energy waste, excessive cycling, or undersized performance on the coldest days.

Electric heaters suit spaces without central hot water. Hydronic units connect to existing boiler loops or dedicated heat sources. Air curtains over entrances reduce heat loss while maintaining pedestrian flow in retail and hospitality settings.

All installations include proper electrical protection, grounded connections, and — for hydronic systems — balanced flow, air bleeding, and insulation on supply lines. Safety checks are completed before the system is handed over.

Where the project requires it, we integrate heating with ventilation systems and building automation — coordinating control sequences so heating, ventilation, and air conditioning work together rather than against each other. Central scheduling reduces energy waste during unoccupied hours.

Our experience in Nukus

Karakalpakstan's continental swing destroys generic hardware: compressors starve in cold, capacitors fail in heat. We deploy Daikin Altherma-class and Mitsubishi Zubadan-type solutions where heating below −15°C is required, and high-ambient cooling lines for July dust storms.

Public buildings and housing near Berdaq Avenue and the museum district need reliable systems with simple maintenance — filters reachable without scaffolding, outdoor units protected from wind-blown sand. We elevate condensers, use anti-corrosion coats, and plan defrost cycles for winter mornings.

Retail and small offices along Kungrad road depend on fast response when a system fails in a heatwave. Aurum Prodest dispatches from Tashkent with pre-diagnosed parts when possible, and offers preventive service each autumn and spring to catch weakened charge or brittle insulation.

Service areas in Nukus

  • Berdaq Avenue
  • A. Dosov district
  • Karakalpakstan Museum area
  • Birlestik
  • Kungrad road corridor
  • Telex center
  • Akbulak
  • Chimbay road junction
  • New residential blocks
  • Market (bazaar) zone

Why clients choose us in Nukus

  • Heat pumps rated for heating well below −15°C
  • High-ambient cooling for +45°C summers
  • Sand and frost protection on outdoor equipment
  • All-season commissioning — winter and summer tests
  • Regional dispatch from Tashkent with planned logistics

What's included

  • 01 Building heat loss calculation
  • 02 Electric and hydronic heater selection
  • 03 Air curtain sizing and installation
  • 04 Convector and radiator placement
  • 05 Integration with ventilation systems
  • 06 Electrical and piping connections
  • 07 Safety inspection and commissioning
  • 08 Scheduled maintenance and service

How we work

  1. 01 Site survey and heat loss analysis
  2. 02 Equipment selection and estimate approval
  3. 03 Contract and delivery scheduling
  4. 04 Equipment delivery to site
  5. 05 Installation and connection works
  6. 06 Testing, handover, and operator briefing

Advantages

Experienced specialists
Work warranty
Certified equipment
Same-day site visit
Transparent pricing
In-house production

Questions about Nukus

What systems work at −25°C frost in Nukus?

Low-temperature inverter heat pumps with dedicated cold-climate kits — such as Daikin Altherma or Mitsubishi Electric Zubadan lines — maintain heating down to roughly −25°C to −30°C depending on model. Standard cooling-only splits are not sufficient as primary heat.

Can an air conditioner be used for heating in winter?

Yes, if it is an inverter heat-pump model within its low-ambient heating range. We calculate balance point against local design temperature and add auxiliary heat only when the physics require it.

How do you protect equipment from desert dust?

Filter screens, more frequent service intervals, sealed electrical boxes, and raised mounting reduce sand ingress. Indoor pre-filters are upgraded where PM levels spike in spring.

What is the lead time for installation in Nukus?

After contract and equipment availability confirmation, crews typically arrive within three to five business days from Tashkent. Winter installs are planned around temperature windows for brazing and pressure testing.

Do you warranty work in Karakalpakstan the same as in Tashkent?

Yes — five years on Aurum Prodest installation workmanship plus manufacturer equipment warranty. Service calls are scheduled through our central office with regional visit batches.

Need a consultation in Nukus? We respond within 15 minutes. Engineer visit and site survey are free when you sign a contract.

Get a consultation