08 · Installation, repair and commissioning of ventilation. Karshi

Ventilation installation
in Karshi

Supply and exhaust ventilation designed, installed, and balanced to meet airflow requirements and sanitary standards for your building type. Aurum Prodest handles new ventilation systems and the repair, upgrade, and recommissioning of existing ones — using ducts from our own Tashkent production facility for precise sections and reliable delivery schedules.

Karshi anchors southern Uzbekistan's oil, gas, and chemical cluster — environments where standard ventilation is unsafe and corrosion is constant. Aurum Prodest installs explosion-protected exhaust where zones require Ex-rated equipment, anti-corrosion coatings on duct and frames, and industrial comfort cooling for control rooms and admin blocks separate from process areas. We deliver full as-built packages for enterprise auditors and safety officers.

Air exchange rates are calculated from room volume, occupancy, process requirements, and applicable sanitary norms — not guesswork. Kitchen exhaust, office fresh air, production area dilution ventilation, and medical facility requirements each follow different rules we know well.

Air exchange rate calculation
Ventilation system design and drawings
In-house duct fabrication

Industrial enterprisesAdministrative buildingsOil & gas facilitiesOffices

Karshi · 08

By the numbers

12+ years on market

500+ projects delivered

50+ specialists

5yr warranty

About the service

Ductwork is fabricated in our shop to project dimensions: rectangular and round sections, transitions, tees, and dampers produced with laser-cut accuracy. On-site installation includes hangers, insulation, fire dampers, and access doors at every maintenance point.

Fans, air handling units, and heat recovery equipment are installed, wired, and connected to controls. We balance each branch with calibrated instruments so design airflow is achieved at every grille and diffuser — not just at the fan.

For existing buildings we survey worn duct sections, corroded fittings, and underperforming fans. Targeted replacement and system upgrades restore airflow and energy efficiency without unnecessary full-system replacement when partial repair is sufficient.

Our experience in Karshi

Refinery and gas-processing neighborhoods demand rigorous zoning: spark-free fans in classified areas, grounded duct, and documentation that matches ATEX-style expectations even when projects follow local permitting paths. Our engineers walk plants with HSE staff before quoting.

Administrative and control buildings need positive pressure and filtration so dust and odors from process units do not infiltrate IT rooms. We install precision cooling for server cabinets and VRV comfort for open offices — electrically segregated from field equipment.

Karshi's summer heat still pushes +44°C; outdoor units for safe zones get high-ambient specs, while sheltered plant rooms use ducted AHUs with redundant fans where downtime is costly. Aurum Prodest holds SRO admission and qualified welder certificates for pressure and ventilation works.

Service areas in Karshi

Mirmiron
Mustaqillik Avenue
Shahrisabz road
Industrial south
Gas processing vicinity
Qarshi-Airag highway strip
Navbahor
Kasbi direction
Railway zone
New admin center

Why clients choose us in Karshi

Explosion-protected ventilation for hazardous zones
Anti-corrosion execution for chemical/industrial air
Control-room pressurization and filtration
Full as-built documentation for enterprise audit
SRO admission and certified engineering staff

What's included

01 Air exchange rate calculation
02 Ventilation system design and drawings
03 In-house duct fabrication
04 Fan and AHU installation
05 Fire damper and insulation work
06 Airflow balancing and aerodynamic testing
07 Repair and modernization of existing systems
08 Compliance documentation and handover

How we work

01 Site survey and requirements analysis
02 Design and duct specification
03 Duct production and equipment delivery
04 Installation and electrical connection
05 Balancing and aerodynamic testing
06 Commissioning and documentation handover

Advantages

Experienced specialists

Work warranty

Certified equipment

Same-day site visit

Transparent pricing

In-house production

Questions about Karshi

Do you work with oil & gas facilities in Karshi?

Yes. We have delivered industrial ventilation in classified areas using Ex-marked fans and switches, grounded installations, and scope agreed with plant safety departments. Non-sparking maintenance access is planned from day one.

Can you provide as-built documentation?

Every industrial project includes equipment passports, test reports, marked-up drawings, and commissioning measurements — suitable for internal QA and external inspection.

How do you separate office AC from process ventilation?

Physically separate air systems — no shared ducts between safe offices and field buildings. Control rooms may get overpressure and dedicated filtration stages.

What cooling suits Karshi summers on plant periphery?

High-ambient condensers, shaded racks, and sometimes evaporative pre-cooling for makeup air on large halls — always sized with local design temperatures, not European defaults.

Do you hold permits for industrial construction work?

Aurum Prodest maintains SRO membership, engineer attestation, and welder qualifications required for ventilation and refrigeration piping on regulated sites.

Need a consultation in Karshi? We respond within 15 minutes. Engineer visit and site survey are free when you sign a contract.

Get a consultation