08 · Installation, repair and commissioning of ventilation. Nukus

Ventilation installation
in Nukus

Supply and exhaust ventilation designed, installed, and balanced to meet airflow requirements and sanitary standards for your building type. Aurum Prodest handles new ventilation systems and the repair, upgrade, and recommissioning of existing ones — using ducts from our own Tashkent production facility for precise sections and reliable delivery schedules.

Nukus sits in one of Uzbekistan's harshest climate bands: winter nights near −25°C and summer afternoons above +45°C demand equipment with a wide operating envelope — not entry-level splits. Aurum Prodest specifies low-temperature heat pumps, frost-proof outdoor units, and heavily insulated refrigerant lines for year-round comfort in apartments, schools, and government buildings. Heating via inverter heat pump often costs less than electric radiators when sized correctly.

Air exchange rates are calculated from room volume, occupancy, process requirements, and applicable sanitary norms — not guesswork. Kitchen exhaust, office fresh air, production area dilution ventilation, and medical facility requirements each follow different rules we know well.

  • Air exchange rate calculation
  • Ventilation system design and drawings
  • In-house duct fabrication
Government institutionsResidential buildingsRetail propertiesOffices
Ventilation installation in Nukus Nukus · 08

By the numbers

12+ years on market
500+ projects delivered
50+ specialists
5yr warranty

About the service

Air exchange rates are calculated from room volume, occupancy, process requirements, and applicable sanitary norms — not guesswork. Kitchen exhaust, office fresh air, production area dilution ventilation, and medical facility requirements each follow different rules we know well.

Ductwork is fabricated in our shop to project dimensions: rectangular and round sections, transitions, tees, and dampers produced with laser-cut accuracy. On-site installation includes hangers, insulation, fire dampers, and access doors at every maintenance point.

Fans, air handling units, and heat recovery equipment are installed, wired, and connected to controls. We balance each branch with calibrated instruments so design airflow is achieved at every grille and diffuser — not just at the fan.

For existing buildings we survey worn duct sections, corroded fittings, and underperforming fans. Targeted replacement and system upgrades restore airflow and energy efficiency without unnecessary full-system replacement when partial repair is sufficient.

Our experience in Nukus

Karakalpakstan's continental swing destroys generic hardware: compressors starve in cold, capacitors fail in heat. We deploy Daikin Altherma-class and Mitsubishi Zubadan-type solutions where heating below −15°C is required, and high-ambient cooling lines for July dust storms.

Public buildings and housing near Berdaq Avenue and the museum district need reliable systems with simple maintenance — filters reachable without scaffolding, outdoor units protected from wind-blown sand. We elevate condensers, use anti-corrosion coats, and plan defrost cycles for winter mornings.

Retail and small offices along Kungrad road depend on fast response when a system fails in a heatwave. Aurum Prodest dispatches from Tashkent with pre-diagnosed parts when possible, and offers preventive service each autumn and spring to catch weakened charge or brittle insulation.

Service areas in Nukus

  • Berdaq Avenue
  • A. Dosov district
  • Karakalpakstan Museum area
  • Birlestik
  • Kungrad road corridor
  • Telex center
  • Akbulak
  • Chimbay road junction
  • New residential blocks
  • Market (bazaar) zone

Why clients choose us in Nukus

  • Heat pumps rated for heating well below −15°C
  • High-ambient cooling for +45°C summers
  • Sand and frost protection on outdoor equipment
  • All-season commissioning — winter and summer tests
  • Regional dispatch from Tashkent with planned logistics

What's included

  • 01 Air exchange rate calculation
  • 02 Ventilation system design and drawings
  • 03 In-house duct fabrication
  • 04 Fan and AHU installation
  • 05 Fire damper and insulation work
  • 06 Airflow balancing and aerodynamic testing
  • 07 Repair and modernization of existing systems
  • 08 Compliance documentation and handover

How we work

  1. 01 Site survey and requirements analysis
  2. 02 Design and duct specification
  3. 03 Duct production and equipment delivery
  4. 04 Installation and electrical connection
  5. 05 Balancing and aerodynamic testing
  6. 06 Commissioning and documentation handover

Advantages

Experienced specialists
Work warranty
Certified equipment
Same-day site visit
Transparent pricing
In-house production

Questions about Nukus

What systems work at −25°C frost in Nukus?

Low-temperature inverter heat pumps with dedicated cold-climate kits — such as Daikin Altherma or Mitsubishi Electric Zubadan lines — maintain heating down to roughly −25°C to −30°C depending on model. Standard cooling-only splits are not sufficient as primary heat.

Can an air conditioner be used for heating in winter?

Yes, if it is an inverter heat-pump model within its low-ambient heating range. We calculate balance point against local design temperature and add auxiliary heat only when the physics require it.

How do you protect equipment from desert dust?

Filter screens, more frequent service intervals, sealed electrical boxes, and raised mounting reduce sand ingress. Indoor pre-filters are upgraded where PM levels spike in spring.

What is the lead time for installation in Nukus?

After contract and equipment availability confirmation, crews typically arrive within three to five business days from Tashkent. Winter installs are planned around temperature windows for brazing and pressure testing.

Do you warranty work in Karakalpakstan the same as in Tashkent?

Yes — five years on Aurum Prodest installation workmanship plus manufacturer equipment warranty. Service calls are scheduled through our central office with regional visit batches.

Need a consultation in Nukus? We respond within 15 minutes. Engineer visit and site survey are free when you sign a contract.

Get a consultation